Calculating the exact cost of a bioreactor is neither simple nor straightforward in any sense. Depending on the type and capacity, the cost of a bioreactor can change significantly. When it comes to types of bioreactors, single-use, and stainless steel are the two most popularly used bioreactors across industries. Stainless steel bioreactors are ideal equipment for large-scale production and have a longer operational lifetime. On the other hand, single-use bioreactors offer speed and flexibility by eliminating the need for sterilization and cleaning processes. These two bioreactors also differ in terms of cost. Single-use bioreactors have a low setup cost but incur higher operational costs in the long run. On the other hand, stainless steel bioreactors have an expensive setup process but come with lower operational costs.
In this blog, we will compare the total cost of ownership between stainless steel and single-use bioreactors.

Stainless Steel and Single-Use Bioreactors – Comparing Key Factors that Affect Their Cost
When selecting between stainless steel and single-use bioreactors, you must consider both short-term and long-term costs. Doing so will help you save money by eliminating any unnecessary expenses. To give better clarity, here is a comparison between the two bioreactors:
1. Building Material and Upfront Cost
Stainless steel bioreactors come with a significantly higher upfront cost due to the complexity and need for high-grade building materials. These bioreactors are frequently cleaned and sterilized with high-pressure steam to change the product batch. Therefore, the vessel of a stainless steel bioreactor needs to be durable enough to withstand high-pressure steam and water. The upfront cost of an SS bioreactor is also high due to the manufacturing complexity and the time required to set up the bioreactor.

Image 2. Stainless steel bioreactor
Lower upfront cost is one of the main reasons why single-use bioreactors dominate stainless steel bioreactors in terms of popularity. Vessels of a single-use bioreactor are made from flexible plastic materials, which cost way less than stainless steel vessels. Additionally, the setup process of a single-use bioreactor is less labor-intensive and takes significantly less time than the installation of a stainless steel bioreactor.

Image 3. Single use bioreactor
2. Long-term Operational Cost
While stainless steel bioreactors have a higher upfront and setup cost, they prove to be relatively cost-efficient in the long run. The steel vessel is durable and has a long lifespan, allowing bio-product manufacturers to use the vessels for an extended period. There is no need to replace parts or the vessel frequently, which saves you from recurring operational costs. In short, the initial investment in stainless steel bioreactors offers high-value returns when used for longer production schedules.
In single-use bioreactors, the plastic vessel comes pre-sterilized but can only be used once per batch. As soon as the batch production is completed, the plastic bioreactor vessel is no longer usable. In addition to the plastic vessels, there are other disposable parts in a single-use bioreactor that can only be used once per batch. The overall cost of these disposable parts can add up over time. Therefore, the single-use bioreactor catches up to the initial upfront cost of stainless steel bioreactors in a span of 2-3 years of production.
3. CIP, SIP, and Maintenance Cost
CIP (Cleaning-In-Place) and SIP (Sterilize-In-Place) are two critical processes in maintaining an optimal environment for using stainless steel bioreactors. The stainless steel vessels of these bioreactors are reusable, which means a new batch of bioproducts can be manufactured in the same vessel. Due to this, manufacturers must thoroughly clean and sterilize the bioreactor vessel to ensure that there is no risk of cross-contamination between products. As a result, highly advanced cleaning and sterilizing equipment are used, which increases the maintenance cost.
Meanwhile, using a single-use bioreactor saves you from the extra maintenance and cleaning expenses. Instead of cleaning and sterilizing the equipment, the whole plastic vessel is replaced with a new one. The primary benefit of doing so is that the new vessel comes pre-sterilized and can be used immediately. However, the cost of reusable parts accumulates over time and becomes cost-ineffective in the long run. At the same time, disposable plastic materials are not good for the environment.
![]() |
|
| CIP&SIP system image | CIP&SIP system image |
Stainless Steel or Single-use Bioreactor – Which One to Choose?
Cost should not be the only factor when deciding between a stainless steel and single-use bioreactor. In order to come up with a definitive answer, you should also consider the following points:
1. Production Capacity and Scaling
The production capacity of stainless steel bioreactors far exceeds that of single-use bioreactors. Stainless steel is ideal for industrial-scale production, with a capacity that can extend up to 20,000 L. In comparison, a single-use bioreactor can only hold up to 5,000 L at its maximum capacity. That is precisely why stainless steel bioreactors are preferred for large production.
![]() |
![]() |
| Reusable bioreactors (lab-industry) | Disposable single use bioreactors |
2. Types of Products you are going to manufacture
If you plan to manufacture multiple types of products, it is better to choose a single-use bioreactor. With a single-use bioreactor, you can easily change the product without incurring any additional expense of sterilization and cleaning. Meanwhile, the steel vessel of the stainless steel bioreactor requires complete cleaning and sterilization to prevent cross-product contamination.
3. Setup and Production Speed
Stainless steel bioreactors are larger and more complex equipment. Therefore, they take notably more time for the complete setup and start production. On the other hand, single-use bioreactors can be set up easily and have a shorter turnaround time.
4. Sustainable Production
Single-use bioreactors are not considered environmentally friendly because they contain numerous disposable and non-reusable parts. As a result, a lot of plastic waste is generated after each batch. However, in the case of stainless bioreactors, the reusable stainless steel vessel reduces the negative impact on the environment.

In addition, sometimes you may also need glass bioreactor for your laboratory testing, then we can also provide you with them.

Image 5.Glass bioreactor
Wrapping It Up!
In conclusion, the setup and upfront cost of a stainless steel bioreactor is high, but it has a low operational cost. On the contrary, the upfront cost for a single-use bioreactor is low. However, due to the high frequency of part changes, the operational cost is higher in single-use bioreactors. The total cost of ownership depends on various factors, including maintenance, cleaning, and production capacity.


At XI'AN RICH SMART TECHNOLOGY CO.,LTD, we not only offer you high-grade bioreactors, but our experts also provide you with experience-based guidance. With the help of our experts, you will be able to choose wisely what is best according to your requirements and needs. Contact us to get started and experience unmatched efficiency that exceeds your expectations!
Contact Info:
Tel: +86-13072962429
Email: info@richtechpm.com
Add: No.151, Zhangba East Road, Yanta District, Xi'an, China
References
https://fermentorchina.com/stainless-steel-bioreactor-fermenter/
http://bioterms.net/index.php/2023/02/19/cost-comparison-between-stainless-steel-and-single-use-bioreactors/
https://assets.thermofisher.com/TFS-Assets/BPD/Reference-Materials/single-use-vs-stainless-steel-white-paper.pdf
https://pharmaceuticalmanufacturer.media/pharmaceutical-industry-insights/biopharma-news/single-use-vs-stainless-steel-bioreactors-which-to-choose/
https://www.excedr.com/blog/how-much-does-a-bioreactor-cost
https://www.crbgroup.com/insights/biotechnology/sustainable-stainless-steel-or-single-use-systems










